qBRIDGE-106  «  Ethernet over xDSL  «  Products  «  www.nsgate.ru
NSGate. Be Sure.


Ethernet over PDH/SDH
Ethernet over xDSL
Ethernet over Fiber
Accessories
New product
qBRIDGE-406
qBRIDGE-406
EFM modem (22.8 Mbps)
qBRIDGE-401   IMUX
Inverse Multiplexer/ Converter
qBRIDGE-102
Ethernet to E2 Converter
qBRIDGE-106.    G.SHDSL Modem/Bridge
The product line is discontinued
Brief  |  Manual

qBRIDGE-106

   qBRIDGE-106 is a low cost reliable G.SHDSL modem working in “Bridge connection” mode. It can be used for connection of remote segments of 10/100Base-TX Ethernet networks over standard two wire copper line or for subscribers connection to ISP using G.SHDSL technology. qBRIDGE-106 enables connection of two LANs with 200-2320 Kbps throughput.

    "Bridge connection" mode modem is transparent for Ethernet frames with VLAN tag and for VPN packets. It has one Ethernet 10/100Base-TX port with Auto-Negotiation and Auto-MDIX capability and one G.SHDSL 200-2320 Kbps port. Packet filtering capability of qBRIDGE-106 helps to save bandwidth by transferring through G.SHDSL line only frames addressed to remote LAN. User can easily configure qBRIDGE-106 with no additional equipment (terminal emulation program and so on). DIP-switches are used to control main qBRIDGE-106 functions. For detailed configuration and statistics HTTP interface is provided. HTTP interface allows user to configure LAN port settings and SNMP settings. For G.SHDSL interface user can select COE/CPE mode and line bit rate.

   qBRIDGE-106 can be used in point to point applications as well as in point to multipoint applications as a CPE for 12/24-port G.SHDSL concentrator maxS-24.

   The product is available with external AC or DC power adapter as a standalone unit in compact small-size metal case.

Technical specifications:
Ethernet Interface
One Ethernet port 10/100Base-TX
Auto-Negotiation 10/100M; Auto-MDIX
Half/Full duplex (10/100-20/200Mbps)
Ethernet to HDLC encapsulation
Frame length up to 1536 bytes
Connector: Shielded RJ-45
Ethernet: "Bridge connection" mode
IEEE 802.1D transparent learning bridge
IEEE 802.1q VLAN pass-through
G.SHDSL Interface
Interface: One G.SHDSL port
G.991.2 Annex A, B
Data rate: 200-2320 Kbps Full duplex
TC-PAM16 line coding
Impedance: 135 Ohm
Up to 8 km reach (24AWG)
Connector: Shielded RJ-11
Management
DIP-switches
HTTP, SNMPv1 (MIB 1, MIB2)
General
Various Diagnostic LED Indicators
Power supply: 100~240VAC/36~72VDC
Power consumption: 3 W
Size: 142 x 159 x 30 mm; weight: 0,6 Kg

Figure 1. Connection of remote LANs over copper line
qBRIDGE-106-appl_1

Figure 2. Connection to ISP
qBRIDGE-106-appl_2

Order Information
ModelP/N Power Supply
qBRIDGE-106     36BLM106AC 100~240V
qBRIDGE-106-DC 36BDM106DC 36~72V