|
PoE-injectors are designed to power remote devices PD (Powered Device) such as wireless access points, IP phones, IP cameras
using a standard Cat 5e / 6 cable. There are different types of PoE injectors:
with or without support for PoE auto detection mode, with external or internal power supply, with Gigabit or only Fast Ethernet,
with output power of 15.4, 30, 60 or 95W.
For example, the new Ultra PoE Injector NIP-191PG uses all four pairs for power supply and guarantees increased power to the output port up to 95W.
The load can be powerful wireless access points, PTZ IP cameras.
There are alternative solutions, called "Passive PoE" or passive PoE-injectors, which allow to use of PoE technology
for devices that are not equipped with this feature initially.
Such devices can only support electrical compliance with the IEEE 802.3af standard, but not protocol ones.
|
| ACTIVE PoE Injectors (complies with IEEE 802.3af/at/bt) |
 |
NIP-191PG Ultra PoE Injector 90-95W Gigabit (95W)
IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
95 watts of maximum power with an input voltage of 56VDC
POE Pin Assignment: 1/2(-), 3/6(+) è 4/5(-), 7/8(+)
Reverse polarity / Over voltage / Overload protections
Operating Temperature: -40 ~ +75°C; Dimensions: 104x82x32mm
Housing: IP30 Protection, DIN Rail or Wall mounting
NIP-191PG: External Power Supply 48-56VDC
|
| NIP-191PG | 62P1IG95 | 1 10/100/1000T Ultra PoE Injector 95 Âò, External PS 48-56VDC, -40~+75°C |
 |
NIP-171PG High-Power PoE Injector 60-72W Gigabit (2x36W)
NIP-171PGB Built-in 24-56 VDC Booster
IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
72W PCE of maximum power with an input voltage of 56VDC
POE Pin Assignment: 1/2(+), 3/6(-) and 4/5(+), 7/8(-)
DIP switch: to select 2 or 4 pairs; Mode A or Mode B; 30W or 36W
Reverse polarity / Over voltage / Overload protections
Operating Temperature: -40 ~ +75°C; Dimensions: 104x82x32mm
Housing: IP30 Protection, DIN Rail or Wall mounting
NIP-171PG: External Power Supply 48-56VDC
NIP-171PGB: External Power Supply 24-56 VDC; Built-in VDC Booster
|
| NIP-171PG | 62P1IG70 | 10/100/1000T PoE Injector 72W (2x36W), External PS 48-56VDC, -40~+75°C |
| NIP-171PGB | 66P1IG70 | 10/100/1000T PoE Injector 72W (2x36W), 24-56VDC Booster, -40~+75°C |
 |
NIP-111PG PoE Injector 802.3at Gigabit (30W)
NIP-111PGB Built-in 12-56 VDC Booster
IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
36W PCE of maximum power with an input voltage of 56VDC
POE Pin Assignment: 1/2(+), 3/6(-). Mode A EndSpan PoE
Reverse polarity / Over voltage / Overload protections
Operating Temperature: -40 ~ +75°C; Dimensions: 104x82x32mm
Housing: IP30 Protection, DIN Rail or Wall mounting
NIP-111PG: External Power Supply 48-56VDC
NIP-111PGB: External Power Supply 12-56 VDC; Built-in VDC Booster
|
| NIP-111PG | 62P1IG30 | 1 10/100/1000T PoE Injector 30W, External PS 48-56VDC, -40~+75°C |
| NIP-111PGB | 66P1IG30 | 1 10/100/1000T PoE Injector 30W, 12-56VDC Booster, -40~+75°C |
 |
NIP-404PG 4-port PoE Injector 802.3at Gigabit (30W)
IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
30 watts of maximum power with an input voltage of 56VDC
POE Pin Assignment: 1/2 (+), 3/6 (-)
Reverse polarity / Over voltage / Overload protections
Operating Temperature: 0 ~ +50°C; Dimensions: 94x62x20mm
External Power Supply 48-56VDC
|
| NIP-404PG | 62P4IG30 | 4 10/100/1000T PoE Injector 30W, External PS 48-56VDC, 0~+50°C |
|
24V15W POE Converter Active PoE 802.3 af/at to Passive PoE (24VDC)
Converts Active PoE 802.3 af/at 48VDC --> Passive PoE 24VDC 15W
POE Pin Assignment: 4/5(+), 7/8(-)
Compatible with Passive PoE devices Ubiquiti, Mikrotik
|
| 24V15W | ZQGAT24V | 10/100/1000T PoE Converter: Input 44-56VDC (802.3af/at), Output 24VDC/15W | |
|
